The Stryker Endoscopy Model 1088 Medical Video Camera is a high definition camera used to capture still and video images of endoscopic surgical applications.
The 1088 Medical Video Camera consists of three main components:
- The camera console
- The camera head
- The focusing coupler
The 1088 also comes with various cables, which like the other components, can be purchased together or separately.
The Camera Console
The camera console is the control center for the 1088 Medical Video Camera and processes the video and photographic images captured during the surgical procedure. The front console panel features controls for adjusting the enhance, gain, and white balance, and for selecting surgical specialty settings that optimize camera performance for specific surgical procedures. The rear console panel provides ports for connecting the 1088 Camera to viewing and recording equipment, such as video monitors, the SDC HD, or photo printers.
The Camera Head
The camera head connects to the camera console and captures video and photographic images, which it relays to the camera console. It features several controls that are accessible through a button control pad located on the top of the camera head.
The Coupler
The coupler threads on to the face of the camera head, enabling a scope to be attached to the camera. It provides a focusing ring to adjust image sharpness
Technical Specifications:
Imaging System
1/3” Progressive Scan CCDs
High Definition
Scanning System
Horizontal: 47.536 kHz
Vertical: 60.02 Hz
Video Outputs
Digital/Analog: Two Digital Video Interface (DVI)/RGBHV, 1280 x 1024 (SXGA) resolution
Connector: 29-pin DVI-I
Composite: One NTSC or PAL standard 1.0V P-P (75 Ohms)
Connector: BNC coaxial
Y/C: Two S-VHS Y-1.0V P-P C-0.29V P-P (75 ohms)
Connector: 4-Pin mini-DIN
Component: One RGB R – 0.7V p-p (75 ohms) G – 1.0 V p-p (w/ SYNC) (75 ohms) B – 0.7 V p-p (75 ohms)
Connector: 8-pin DIN
Resolution
Horizontal: 1100 lines
Vertical: 600 lines
Mounting
Endoscope Eyepiece used with coupler
C-mount camera head used with C-mount scopes
(C-mount 1”-32UN-2A) Auto Shutter Range 1/60 to 1/50,000 second Gain OFF 0 dB LOW 5 dB MEDIUM 10 dB HIGH 15 dB
Auto Shutter Range
1/60 to 1/50,000 second
Gain
OFF 0 dB LOW 5 dB MEDIUM 10 dB HIGH 15 dB
Operating Conditions
Temperature: 0° to 40° C
Relative Humidity:10% to 75%
Transport & Storage Conditions
Temperature: -20° to 60° C
Relative Humidity: 10% to 75%
Atmospheric Pressure: 700 hPa to 1060 hPa
Input Electrical Ratings
100-240V ~ 50/60 Hz 0.6A
Total Shipping Weight
11 lbs (5.0 kg)
Dimensions
Camera Control Unit: 12.5”w x 3.8”h x 15.25”d (31.8cm w X 9.7cm h X 38.7cm d)
Camera Head Cable to Camera Control Unit: 10.3 feet (3.15m) sealed cable or 20.7 foot (6.30m) sealed cable (sensed by CCU)
Enhancement
16 levels (switchable)
Stryker 1088HD Camera Heads:
Ref: 1088-210-122 Stryker 1088 HD 3-Chip Camera Head and 24 mm Coupler Kit
Ref: 1088-210-105 Stryker 1088 HD 3-Chip Camera Head, C-Mount
Ref: 1088-510-122 Stryker 1088 HD 3-Chip 90° Camera Head and 24 mm Coupler Kit
Ref: 1088-710-122 Stryker 1088 HD 3-Chip Inline Camera Head and 24 mm Coupler Kit
Ref: 1088-710-105 Stryker 1088 HD 3-Chip Inline Camera Head, C-Mount
Ref: 1088-310-130 Stryker 1088 HD 3-Chip Pendulum Camera Head with Integrated Coupler